DSP-62-AEC, DSP-62-UC – Introduction
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world
of unique, creative, and affordable solutions to the vast range of problems that confront the
video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we
have redesigned and upgraded most of our line, making the best even better!
Getting Started
We recommend that you:
• Unpack the equipment carefully and save the original box and packaging materials for
possible future shipment.
• Review the contents of this user manual.
To check for up-to-date user manuals, application programs, and if firmware upgrades are
available (where appropriate):
• For DSP-62-AEC, go to www.kramerav.com/downloads/DSP-62-AEC.
• For DSP-62-UC, go to www.kramerav.com/downloads/DSP-62-UC.
Achieving Best Performance
• Use only good quality connection cables (we recommend Kramer high-performance,
high-resolution cables) to avoid interference, deterioration in signal quality due to poor
matching, and elevated noise levels (often associated with low quality cables).
• Do not secure the cables in tight bundles or roll the slack into tight coils.
• Avoid interference from neighboring electrical appliances that may adversely influence
signal quality.
• Position your Kramer device away from moisture, excessive sunlight, and dust.
Safety Instructions
Caution:
• This equipment is to be used only inside a building. It may only be connected to other
equipment that is installed inside a building.
• For products with relay terminals and GPI/O ports, refer to the permitted rating for an
external connection located next to the terminal or in the User Manual.
• There are no operator serviceable parts inside the unit.
To Next Page
Loading...
Need help?
General
