Contents
Introduction 1
Getting Started 1
Overview of DSP-62-AEC, DSP-62-UC 2
Typical Applications 4
Defining DSP-62-AEC, DSP-62-UC 5
DSP-62-AEC, DSP-62-UC Front Panels 5
DSP-62-AEC, DSP-62-UC Rear Panels 6
Mounting the Device 7
Connecting DSP-62-AEC 8
Connecting DSP-62-UC 9
Connecting the Output to a Balanced/Unbalanced Stereo Audio Acceptor 10
Connecting to the Device via RS-232 10
Operating the DSP-62-AEC, DSP-62-UC 10
Connecting through Ethernet 11
Using the Embedded Webpages 14
Browsing the DSP-62 Webpages 14
Using the Top Status Bar 15
Viewing the Matrix Area 17
Processing Audio Signals 18
Linking Analog Inputs and Outputs 18
Processing a Signal 18
Routing Inputs to Outputs 32
Mixing Audio Signals 36
Audio and Video Settings 39
Defining Audio Settings 39
Defining Video Settings 40
Defining HDMI Auto Switching 41
Defining General Settings 42
Performing Firmware Upgrade 43
Importing/Exporting Global Settings 44
Restarting and Resetting the Device 45
Defining Communication Settings 46
Setting Access Security 47
Viewing Device Information 50
Upgrading Firmware 51
Technical Specifications 52
DSP-62-AEC Technical Specifications 52
DSP-62-UC Technical Specifications 53
Default Communication Parameters 54
Default EDID for DSP-62-UC 56
Protocol 3000 58
Understanding Protocol 3000 58
Protocol 3000 Commands 59
Result and Error Codes 84
To Next Page
Loading...
Need help?
General
