Kramer DSP-62-UC User Manual

Kramer Electronics Ltd.
DSP-62-AEC, DSP-62-UC – Audio and Video Settings
41
Defining HDMI Auto Switching
Auto switching is applicable to DSP-62-UC only.
By default, the input selected is the last connected signal (the last plugged-in signal). Users
can choose by Priority or take manual control via the front panel buttons by selecting Manual
mode.
To configure auto switching:
1. From the Navigation List, select AV Settings.
2. In the Video Selection Mode list, select a video mode. High is the default.
3. Click SET VIDEO.
Auto switching is set.

Kramer DSP-62-UC Specifications

General

Brand	Kramer
Model	DSP-62-UC
Category	Recording Equipment
Language	English