KDS-7-MNGR ā Using KDS-7-MNGR Embedded Web Pages
To upgrade the firmware:
1. In the Navigation pane, Select Device Management>Firmware. The Firmware tab
appears.
Figure 35: Firmware Tab
2. Next to the device ID, mark the checkbox to make changes to a specific device.
You can select only devices of the same model for firmware upgrade
3. Under Firmware, click OPEN.
4. Select and upload the firmware file.
5. Click APPLY.
6. View firmware status and upgrade. Firmware is complete when Progress reaches 100%
Firmware upgrade is complete.
Managing Encoder/Decoder Device Signals
KDS-7-MNGR enables controlling encoder/decoder device signals.
A green indication light next to a device, indicates that a device is online.
To Next Page
Loading...