Kramer KDS-7-MNGR User Manual

Kramer Electronics Ltd.
KDS-7-MNGR – Using KDS-7-MNGR Embedded Web Pages
49
2. Select the Network tab.
Figure 52: Device Settings – General Page
3. Define the IP settings:
▪ DHCP mode – Set DHCP to On (default) or Off.
▪ IP Address – When DHCP mode is set to Off, the device uses a static IP address.
This requires entering mask and gateway addresses.
▪ Mask Address – Enter subnet mask.
▪ Gateway address – Enter the gateway address.
4. Define TCP (default, 5000) and UDP (default, 50000) ports.
Network settings are defined.

Kramer KDS-7-MNGR Specifications

General

Brand	Kramer
Model	KDS-7-MNGR
Category	Network Hardware
Language	English