Defining KDS-7-MNGR Time and Date
You can set the device time and date manually or Sync the device time and date to any
server around the world.
To define KDS-7-MNGR Time and Date:
1. In the Navigation pane, Select Manager Settings. The General tab in the Manager
Settings page appears (see Figure 51).
2. Select the Time and Date tab. The Time and Date tab appears.
Figure 53: Device Settings Page – Time and Date Tab
3. Next to Use Time Server (NTP), click YES to use time server (NTP).
4. Type in server information:
▪ Enter the server address.
▪ Set daily sync hour.
5. Click SAVE.
Time and date settings are defined.
To Next Page
Loading...