Kramer TP-789Rxr

Kramer Electronics Ltd.
WP-789T, TP-789R, TP-789Rxr – Connecting WP-789T, TP-789R, TP-789Rxr
13
Emitting 38kHz IR Signals
WP-789T can emit a 38kHz IR signal, received via the HDBaseT receiver using a fixed
38kHz IR sensor, to control a device that is connected to WP-789T (for example, a Blu-ray
player source).
To emit a 38kHz IR signal:
• Connect the emitter wires to the WP-789T IR terminal block as illustrated in Figure 7.
Figure 7: Connecting IR Emitter – 38kHz
Emitting Wide-Range Modulated IR Signals
WP-789T can emit a wide-range modulated IR signal, received via the HDBaseT receiver
using a wide-range IR sensor, to control a device that is connected to WP-789T (for example,
a Blu-ray player source).
To emit a wide-range modulated IR signal:
• Connect the emitter wires to the WP-789T IR terminal block as illustrated in Figure 8.
Figure 8: Connecting IR Emitter – Wide-Range Modulated