The Load/Save Configuration Facility
The Upload/Save Configuration facility lets you retrieve and save a configuration.
To load a configuration:
1. Click the Load button.
The Load browser window appears.
2. Browse to the required file and press Open.
The configuration is retrieved and the success message is displayed.
To save the current configuration:
1. Click the Save button.
The Save Configuration success message is displayed.
2. Do either of the following:
▪ Click Download to either open the file or save it to the required location
—OR—
▪ Click OK to complete the procedure
Note: When saving the configuration using Internet Explorer 11 press CTRL+S.
To reset the VM-214DT to factory default parameters:
1. Click the Factory reset button.
The confirmation message shown in Figure 24 is displayed.
Figure 24: The Factory Reset Popup Warning
2. Click OK to continue or Cancel to exit the procedure.
3. Click OK.
The progress message is displayed.
On completion, the success message is displayed.
4. Click OK.
To Next Page
Loading...
