Kramer VP-701XL

48
Logos
Logo enable 12B 0..1 = Off, On
Logo number 143 0..9 Logo selection
H/V out shift (H) 0AD 0..100 %
H/V out shift (V) 0AE 0..100 %
Max fade level 10F 0..100%
Layer priority 144 0..5
Borders
Border enable 150 0..1 = Off, On
Border H size 152 0..99
Border V size 151 0..99
Border H offset 153 0..99
Border V offset 154 0..99
Border Opacity 158 0 (fully transparent) ..100 (solid)
Border Y 155 16..235
Border U 156 16..240
Border V 157 16..240
Adjust sources
Source to adjust 116 0x10 = RGB1, 0x11 = RGB2, 0x12 = RGB3
0x30 = CV1, 0x31 = CV2, 0x32 = CV3
0x40 = YC1, 0x41 = YC2, 0x42 = YC3
0x50 = SDI1, 0x51 = SDI2
0xD0 = OUT1, 0xD1 = OUT2
0xF0 = TC1, 0xF1 = TC2
Testcard 0..10 0DC 0..10
TL pos. adj. (left) 0..9 0B6 -100..100
TL pos. adj. (top) 0..9 0B7 -100..100
BR size adj. (right) 0..9 0DE -100..100
BR size adj. (bottom) 0..9 0DF -100..100
Audio input 0..10 0D0 0..9 = Channels 1 .. 10 on A2-2000
Audio vol 0..10 0CF -16..15 (-16=Mute)
Bal 0..10 0D1 -15..15
Input pixel phase 0..2 091 0..31
RGB input type 0..2 0C1 0 = Auto
1 = D-RGB
2 = D-YUV
3 = A-RGB
4 = A-YUV
RGB contr. (red) 0..2 0C5 75..150
RGB contr. (green) 0..2 0C6 75..150
RGB contr. (blue) 0..2 0C7 75..150
De-int. 0..9 0B8 0..5 = Normal, Auto, Film 3:2, M.comp.low,
M.comp.med., M.comp.high
(Film mode detected) 0..9 0E3 0..1 = Not detected, Detected
Bright 3..8 0BB 0..180