Contents
1 Introduction 1
2 Getting Started 1
2.1 Quick Start 2
3 Overview 3
3.1 Defining EDID 3
3.2 About HDMI 4
3.3 About HDCP 5
3.4 Recommendations for Best Performance 5
4 Your VS-66H 6x6 HDMI Matrix Switcher 5
4.1 Using the IR Transmitter 8
5 Installing the VS-66H on a Rack 9
6 Connecting a VS-66H 6x6 HDMI Matrix Switcher 10
7 Operating the VS-66H 6x6 HDMI Matrix Switcher 12
7.1 Switching an Input to an Output 12
7.2 Acquiring the EDID 12
7.2.1 Acquire an EDID from a Connected Output 12
7.2.2 Acquire an EDID from Several Sets of Inputs and Outputs 13
7.2.3 Acquire an EDID from Several Connected Outputs (Auto) 14
7.2.4 Acquire the Default EDID 14
7.3 Storing and Recalling a Setting 14
7.4 Connecting to the VS-66H via RS-232 15
7.5 Controlling via ETHERNET 15
7.5.1 Connecting the ETHERNET Port directly to a PC (Crossover Cable) 15
7.5.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable) 17
8 Technical Specifications 17
9 Communication Parameters 17
10 Kramer Protocol 2000 18
Figures
Figure 1: VS-66H 6x6 HDMI Matrix Switcher 6
Figure 2: Connecting a VS-66H 6x6 HDMI Matrix Switcher 11
Figure 3: Local Area Connection Properties Window 16
Figure 4: Internet Protocol (TCP/IP) Properties Window 16
Tables
Table 1: VS-66H 6x6 HDMI Matrix Switcher Features 7
Table 2: Technical Specifications of the VS-66H 17
Table 3: Communication Parameters 17
Table 4: Protocol Definitions 18
Table 5: Instruction Codes for Protocol 2000 19
To Next Page
Loading...
