Kreg KMA3225 - English; Table of Contents; Safety Precautions

2
Safety Precautions
WARNING Before using a power tool with this product, read, and follow the
tool manufacturer’s instructions and safety precautions in addition to the safety
precautions below to reduce risk of serious injury from hazards such as re, electric
shock, or rotating drill bit.
■ Follow your drill manufacturer’s safety guidelines.
■ Follow your clamp manufacturer’s safety guidelines. Keep your hands clear when
clamping to avoid pinch points. The clamping limit on this jig is 300 lbs.
■ When drilling, always ensure that the workpiece is clamped securely. It is
dangerous to hold the workpiece in place by hand.
■ The drill bit is sharp; handle with care and avoid unintended cutting. The drill bit
may be hot after repetitive use.
■ Always wear personal protective equipment certied as adequate in addition to
what your drill manufacturer requires.
■ Do not allow familiarity gained from frequent use of your tools to replace safe work
practices. A moment of carelessness is sufcient to cause severe injury.
WARNING Avoid awkward hand positions where a sudden slip could cause contact
with the rotating drill bit.
WARNING Do not operate this tool or any machinery while under the inuence of
drugs, alcohol, or medications.
WARNING This product can expose you to chemicals including Acrylonitrile and
other chemicals, which are known to the State of California to cause cancer and
reproductive harm. For more information go to www.P65Warnings.ca.gov.
WARNING Drilling, sawing, sanding, or machining wood products can expose you
to wood dust, a substance known to the State of California to cause cancer. Avoid
inhaling wood dust or use a dust mask or other safeguards for personal protection.
For more information go to www.P65Warnings.ca.gov/wood.
Table of Contents
Safety Precautions . . . . . . . . . . 2
Pre-Assembly. . . . . . . . . . . . . 3
Assembly . . . . . . . . . . . . . . . 4
Face-Framed Cabinets . . . . . . . . 5
Frameless Cabinets . . . . . . . . . 6
Operation . . . . . . . . . . . . . . . 8
Using the Jig for Cabinet Hardware
Installation . . . . . . . . . . . . . . 9
Connect Jigs Together . . . . . . . .11
Maintenance . . . . . . . . . . . . .11
Care and Cleaning . . . . . . . . . .11
Troubleshooting . . . . . . . . . . .11
Accessories. . . . . . . . . . . . . .11