KRK ERGO - Features

Page | 7
3. Features
 High-performance, state-of-the-art Digital Signal Processor for room correction and analysis
 Mastering grade Analog-to-Digital and Digital-to-Analog converters
 Can be used as an Audio Interface with room correction, or Stand Alone room correction
 Balanced ¼” TRS Line Inputs
 Balanced ¼”Line Outputs for dual system connection (A/B) or 2.1 Connection (A+B)
 Large Illuminated Analog Volume Control
 Illuminated Headphones control
 Illuminated Monitor Selection buttons
 Focus/Global/Bypass Mode controlled by illuminated button
 Patented RoomPerfect™ technology corrects phase and frequency problems
 ERGO Cal Software compatible with OSX and Windows platforms.
 Professional calibrated measurement microphone and microphone stand adapter.
As ERGO uses new some new technology you may not be familiar with, please refer to the glossary at the back of this
manual to get more information about any of the terms used.
4. ERGO Package
Your ERGO package contains the following items:
 ERGO hardware interface, containing the monitoring controls, Digital Signal Processing, A/D-D/A
convertors and input/output connectors.
 ERGO Microphone – Calibrated measurement microphone used when calibrating the room only
 ERGO Microphone Adapter, If your microphone cable has an XLR connection, this cable allows it to be
converted to a ¼” TRS connection for use with ERGO.
 ERGO Installation Disc – This contains the relevant installer for your system and an electronic copy of this
user guide.
 6-pin to 6-pin 1394a (Firewire 400) cable for connecting ERGO to your OSX or Windows hardware.