KROHNE OPTIMASS 6400 - Flow Sensor

1 INTRODUCTION
6
OPTIMASS 6400
www.krohne.com 11/2017 - 4004960802 - AD OPTIMASS 6400 SIL R02 en
1.4.2 Flow sensor
The flow sensor variant is identified by the V number on the nameplate:
Valid flow sensor codes for SIL device variant: OPTIMASS 6000
-: all variants are valid
Code VE ab c d e fg h j k l m n p q r s t u v w
Position 1-2 3-4 5 6 7 8-9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Functional
safety
relevant
x x x x x
Code Description Valid flow sensor codes for SIL device variant
VE Prefix to code VE
ab Flow sensor type and size
Flow sensor type and sizeFlow sensor type and size
Flow sensor type and size 71, 72, 73, 74, 75, 76 or 77
c Manufacturer specific -
d Tube material -
e Surface finish -
fg Connection size - flanges -
h Sealing face -
j Design
DesignDesign
Design K only
k Options -
l Hazardous area approval -
m Sanitary and material approvals -
n Configuration -
p Calibration -
q Process requirements
Process requirementsProcess requirements
Process requirements 0 or 1
r Extended options 0 only
s Customer specific
Customer specificCustomer specific
Customer specific 0
t Signal converter type
Signal converter typeSignal converter type
Signal converter type 6 or 7
u Destination -
v Spare -
w Spare -