I - 1
General Information
The intended use shall also include the adherence to
the operating, maintenance and repair conditions set by
the manufacturer.
Permissible crops: Agricultural crops such as hay,
straw and grass silage.
Collecting and baling materials that
are not cited here is permitted only in
agreement with the manufacturer.
A basic prerequisite is in any event
forming windrows of the baled
product and independently collecting
with the pick-up when driving over.
The EC Declaration of Conformity corresponding to
the EC Directive is located on the inside of title page.
1 General Information
These operating instructions contain basic information
that must be observed in mounting, operation and
maintenance. Therefore these operating instructions
must be read without fail by the personnel before use
and start-up. They must also be accessible to the
personnel.
Not only must the general safety instructions mentioned
in Chapter 2 on safety be observed, but also the special
safety instructions added to the other chapters.
Manufacturer:
Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Str. 10
D-48480 Spelle (Germany)
Telephone: 0 59 77/935-0
Fax: 0 59 77/935-339
E-mail: info.ldm@krone.de
1.3 Information Required in Case
of Questions and Orders
Original spare parts and accessories
authorised by the manufacturer help to
ensure safety. Use of other parts may
void the liability for any resulting damage.
The machine data are rendered on the type plate (1),
The type plate is on the right side of the machine. When
enquiring about the machine and ordering spare parts,
state the type designation, the vehicle ID No. and the
year of construction of the machine (see below).
Type
Year of
construction
Vehicle
ID No.
The entire identification has the value
of a certificate and may not be
changed or made illegible!
1.2 Intended Use
The Big Pack 890/XC; Big Pack 1270/XC/MultiBale;
Big Pack 1290/XC and BigPack 1290 HDP / XC
Balers are built exclusively for customary use in
agricultural work (use as intended).
Any use extending beyond this is considered as not as
intended. The manufacturer is not liable for damage
resulting from this, the user alone bears the risk for
this.
Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Str. 10 D-48480 Spelle
Made in
Germany
BPXC0100
All information, illustrations and
technical data in these operating
instructions correspond to the latest
state at the time of publication. Design
modifications at any time without
statement of reason shall be reserved.
1.1 Purpose
The Big Pack 890/XC; Big Pack 1270/XC/MultiBale;
Big Pack 1290/XC and BigPack 1290 HDP / XC Balers
work with the “Variable Feeding System”. They produce
highly compacted and dimensionally stable big bales
with a length of 1.0 to 2.7 m under all conditions.
These operating instructions apply to Big Pack Balers:
Big Pack 890/XC,
Big Pack 1270/XC/MultiBale,
Big Pack 1290/XC and
BigPack 1290 HDP / XC
To Next Page
Loading...
