Krone Comprima F 155 XC X-treme - Menu 1 Number of Film Layers (Film Tying)

Terminal – Menus
150
13.6.3 Menu 1 “Number of Film Layers” (Film Tying)
IBT000025
n
IBT000026
8,0
1,5
3.0
n
Fig.
109
Prerequisite
– The menu level is called, refer to chapter entitled Terminal - Menus, “Calling the Menu
Level”.
– In menu 8 “Selection Type of Tying”, film tying is selected, refer to chapter entitled Terminal
- Menus, menu 8 “Selection Type of Tying”.
• Select
n
to open the menu.
The display shows menu 1 “Number of Film Layers”.
Setting the number of film layers
• Increase or reduce the value, refer to chapter entitled Terminal - Menus “Changing Value”.
• Save value.
Note
KRONE recommends 3.5 – 4 film layers for optimum chamber film wrapping. The minimum
required film layers depend on the condition of the crops.
With round bales whose diameter measures more than 130 cm and/or very dry or very wet
crops, KRONE recommends at least one additional film layer.