Krone Comprima F 155 XC X-treme - Page 2

Table of Contents
2
EC Declaration of Conformity
We
Maschinenfabrik Krone Beteiligungs-GmbH
Heinrich-Krone-Str. 10, D-48480 Spelle
hereby declare as manufacturer of the product named below, on our sole responsibility,
that the
Machine: Round Baler
Type: Comprima F 155 XC X-treme
Comprima V 150 XC X-treme
to which this declaration refers is in compliance with the following relevant provisions of:
• EC Directive 2006/42/CE (machines),
• EU Directive 2014/30/EU (EMC). Within the meaning of the Directive the
harmonised standard EN ISO 14982:2009 was taken as a basis.
The signing Managing Director is authorised to compile the technical documents.
Spelle, 01.08.2017
Dr.-Ing. Josef Horstmann
(Managing Director, Design & Development)
Year of manufacture:
Machine no.:
CV0