EasyManua.ls Logo

KStar E8KT - 1.2 Operation Modes; 1.3 Safety Introduction

KStar E8KT
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.2 Operation Modes:
There are three basic modes that end users can choose via inverter screen/APP.
03
04
BAT PRIORITY: Under this mode, the battery is only used as a backup power supply when
the grid fails and as long as the grid works, the batteries won’t be used to power the loads.
The battery will get charged with the power generated by the PV system or from the grid.
PEAK SHIFT: This mode is designed for time-use mode customer. The customer is able to
set up the charging/discharging time & power via inverter screen or APP.
SELF CONSUME: The energy generated by the solar panels will be used in the following
order: Feed the home loads; Charge the battery and then, feed into the grid.When the sun is
off, the load will be supported by battery to enhance self consumption. If the power supply
from the batteries is not sufficient, the grid will support the load demand.
$
TIME
Electricity Price
1.3.2 Operator Requirements
The operators should get a professional qualification, or be trained.
The operators should be familiar with the whole storage system, including compositions and
working principles of the system.
The operators should be familiar with the Product Instruction.
While maintaining, the maintainer is not allowed to operate any equipment until all the
equipment has been turned off and fully discharged.
The warning signs contain important information for the system to operate safely, and it is
strictly prohibited to tear or damage them. Ensure that the warning signs are always well-
functioned and correctly placed. The signs must be replaced immediately when damaged.
1.3.3 Protection of Warning Sign
1.3.1 Manual Keeping
This manual contains important information about operating the system. Before operating,
please read it very carefully.
The system should be operated in strict accordance with the instructions in the
manual,otherwise it can cause damages or loss to equipment, personnel and property.
This manual should be kept carefully for maintenance.
1.3 Safety Introduction
User Manual User Manual

Related product manuals