Need help?Do you have a question about the KStar E8KT and is the answer not in the manual?
Explains DC-, AC-, and Hybrid-coupled storage system schemes.
Describes three basic operating modes: Self Consume, Peak Shift, and Bat Priority.
Covers manual keeping, operator requirements, and warning sign protection.
Details hazard information and other safety aspects of the battery.
Lists DANGER and WARNINGs related to high voltage, electric shock, and chemicals.
Lists all components delivered with the system for inventory check.
General requirements and restrictions for installation locations.
Specific prohibited locations for installation based on proximity and environment.
Safety requirements for installation near habitable rooms, including fire spread prevention.
Step-by-step guide for installing the battery and mounting panel.
Continues battery installation steps, including mounting and securing.
Step-by-step guide for installing the inverter onto mounting panels.
Steps to check battery, PV, and grid input parameters after installation.
Step-by-step guide to safely turn on the system.
Step-by-step guide to safely turn off the system.
Steps to take when the system is running abnormally and emergency handling.
Describes the EMS interface, including indicators and buttons.
Explains the meaning of different LED indicator states and their codes.
Covers general settings and operation modes like Self Consume, Peak Shift, Bat Priority.
Details settings for Grid STD, Language, Date/Time, and CT self-check.
Provides an overview of the configuration menu structure and options.
Details menu settings for Zero export, DRM, EPS, Remote CTRL, CEI SPI Ctrl, GFCI ENB.
Details menu settings for BMS, Maintain SOC, Force Wake, Grid STD, Run Setting.
Details menu settings for GRID POWER, INV VOLT MAX/MIN, INV FREQ MAX/MIN.
Details menu settings for GRID U MAX/MIN, GRID F MAX/MIN, OVER VOLT, UNDER VOLT.
Details menu settings for REACT RESP, VRT, POW SI RATE, 485 Address, Baud Rate, Language, Backlight, Date/Time, Clear REC.
Details menu settings for Password, Maintenance, Auto Test, CT self-check, INV Module, Module SN, Firmware, Record, BMS Info, Run, Statistic Time stat.
Specifies environmental requirements for storing the battery.
Provides recharging intervals based on temperature and maximum storage times.
Outlines checks to perform on the battery before recharging.
Instructions to download the SOLARMAN Smart APP.
Steps to assemble the logger to the inverter communication interface.
Explains indicator lights and their status for NET, COM, and READY.
Troubleshooting guide for abnormal states based on indicator lights.
Details key-press methods and notices for the reset button.
Guide to registering an account on the SOLARMAN Smart platform.
Steps to create a plant profile within the SOLARMAN Smart APP.
Instructions on how to add a logger to the system via SN or scanning.
Steps for configuring the logger's network connection (Wi-Fi, AP network).
Lists alarm codes (W00-W31) and their English descriptions.
Lists error codes (F00-F32) and their English descriptions.
Provides basic problems, codes, and solutions for common faults.
Continues the fault diagnosis table with more codes and solutions.
Lists technical specifications for the battery, including capacity, type, voltage, and temperature.
Lists electrical specifications like energy capacity, battery type, and voltage range.
Details operational specs like charging/discharging current, temperature, and humidity.
Lists BMS specifications like module connections and communication protocols.
Lists physical attributes like weight, dimensions, IP protection, and warranty.
Lists safety certificates for the battery.
Lists model-specific PV and battery terminal specifications.
Details grid connection parameters like rated voltage and frequency.
Lists parameters for backup load terminals, including voltage, frequency, and current.
Lists general parameters like temperature, protective class, ingress protection, and altitude.
Lists various protection functions implemented in the system.
Lists grid regulation and safety standards the product complies with.
Lists EMC standards the product complies with.
Provides grid specifications (voltage, frequency, boot time) for various countries.
Outlines routine checks for wire connections, cables, terminals, and ground connection.
Periodic checks of the battery system's environment and operation.
Guidelines for cleaning the equipment and battery modules.
Periodic inspection of cables, terminals, and the management system.
Important notes to follow during maintenance and after operation.
Requirements for providing proof of purchase and product condition for warranty claims.
Conditions for processing replacements and allowing repair time.
Circumstances under which the company can refuse warranty service.
To Next Page
General