56
Bypass Switch: Enable or disable bypass breaker connection detection. The default
value is Disable.
Battery ground Fault: Enable or disable battery grounding failure detection. The default
value is Disable.
Lightning arrester(SPD) : Enable or disable SPD detection. The default value is
Disable.
Generator (GEN) : Enable or disable GEN detection. The default value is Disable.
OUT01~OUT06: Output dry contact port, modify on the LCD. The default value is
Disable.
Setting value:
No. Item No. Item
1 URGENT_ALARM 8 BATTERY_SUPPLY
2 MINOR_ALARM 9 NO_SUPPLY
3 MAIN ABNORMAL 10 ECO_MODE
To Next Page
Loading...
