64
4.3.7 About: check the software version
4.3.7.1 Monitor and LCD software version
4.4 Display Messages/Troubleshooting
This section lists the event and alarm messages that the UPS might display. The messages
are listed in alphabetical order. This section is listed with each alarm message to help you
troubleshoot problems.
Fault Information
No Fault Cord UPS Alarm Warning Buzzer LED
1 2 REC Over Temperature Twice per second Fault LED lit
2 3 REC par. cable Fault Twice per second Fault LED lit
3 4 REC Over Current Beep continuously Fault LED lit
4 5 REC Power Fault Beep continuously Fault LED lit
5 7 Input SCR Fault Beep continuously Fault LED lit
6 10 Battery SCR Fault Beep continuously Fault LED lit
7 12 Charge SCR Fault Beep continuously Fault LED lit
8 14 Fan Fault Beep continuously Fault LED lit
9 17 Fan Power fault Beep continuously Fault LED lit
10 18 Charger Over Temp. Beep continuously Fault LED lit
11 19 Soft Start Failed Beep continuously Fault LED lit
12 20 BAT Charger Fault Beep continuously Fault LED lit
13 22 REC Comm. Fault Once per 2 seconds Fault LED blinking
14 25 REC Initializes Fault Beep continuously Fault LED lit
15 29 Unit insert fault Once per 2 seconds Fault LED lit
To Next Page
Loading...
