EasyManuals Logo

KTI Networks KGC-310 User Manual

KTI Networks KGC-310
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
-7-
Quality of Service
For conversion between two different speeds, the device is featured with powerful Quality of Service
(QoS) function which can classify the priority for received network frames based on the ingress port
and frame contents. Furthermore, many service priority policies can be configured for egress operation.
Web Management
The device is embedded with an Http server which provides management functions for advanced
network functions including Port Control, Quality of Service, and Virtual LAN functions. The manage-
ment can be performed via Web browser based interface over TCP/IP network.
1.1 Features
Basic functions
z Provides tri-speed 10/100/1000Mbps copper to 1000Mbps fiber conversion
z Provides mini-GBIC SFP design for the fiber port to accommodate any type of SFP fiber transceiver
when needed.
z Support full wire speed Gigabit copper to Gigabit fiber conversion
z The copper port supports auto-negotiation and auto-MDI/MDI-X detection
z Copper port auto-negotiation mode, speed and duplex configuration by DIP switch settings
z Link Fault Pass Through function allows link fault status passes through between copper link and
fiber link transparently.
z Far End Fault function on fiber port
z Supports 802.3x flow control for full-duplex and backpressure for half-duplex
z Supports loopback test between two devices over fiber link
z Supports remote twisted-pair status monitoring
z Diversified mounting support : desktop, wall, center rack, and optional Din-Rail support
z Center chassis installation : support installation in a center chassis rack with benefits of central
software management and redundant power backup.
z Support wide range of fiber options : multimode fiber, single mode fiber (short reach up to long
reach), Bi-directional single fiber, and CWDM
Management functions
z Port configuration control and status monitoring
z Supports Jumbo frame conversion
z Packet filtering
z 802.1Q Control between two ports
z Quality of Service (QoS) control for packet traffic
z Supports loopback test
z Supports remote twisted-pair status monitoring
z In-band embedded firmware upgrade function
z Web-based browsing interface

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTI Networks KGC-310 and is the answer not in the manual?

KTI Networks KGC-310 Specifications

General IconGeneral
BrandKTI Networks
ModelKGC-310
CategoryMedia Converter
LanguageEnglish