16 COOLING SYSTEM
188
F00764-10
– Stand the motorcycle upright on a horizontal surface.
–
Check the coolant level in compensating tank
1
.
The coolant level must be between the two markings.
» If the coolant level does not match the specified value:
– Correct the coolant level.
Coolant ( p. 235)
F00763-10
–
Remove radiator cap
2
and check the coolant level in the
radiator.
The radiator must be filled completely.
» If the coolant level does not match the specified value:
– Check the coolant level and the reason for the loss.
» If you had to add more coolant than the specified amount:
> 0.20 l (> 0.21 qt.)
– Fill/bleed the cooling system. ( p. 190)
– Mount the radiator cap.