6 CONTROLS 12
6.1 Clutch lever
101655-10
(125/150 SX)
The clutch lever
is fitted on the left side of the handlebar.
The clutch is hydraulically operated and self-adjusting.
L01224-11
(All 250/300 models)
The clutch lever
is fitted on the left side of the handlebar.
The clutch is hydraulically operated and self-adjusting.
6.2 Hand brake lever
L00932-10
Hand brake lever
is located on the right side of the handlebar.
The hand brake lever is used to activate the front brake.
6.3 Throttle grip
L00932-11
Throttle grip
is fitted on the right side of the handlebar.
6.4 Kill switch
101659-10
The kill switch
is fitted on the left side of the handlebar.
Possible states
• Kill switch in basic position – In this position, the ignition circuit is closed, and
the engine can be started.
• Kill switch pressed – In this position, the ignition circuit is interrupted, a run-
ning engine stops, and a non-running engine will not start.
To Next Page
Loading...
