13 SERVICE WORK ON THE CHASSIS
232
S03920-10
– Move the clutch fluid reservoir mounted on the handlebar to a
horizontal position.
– Check the fluid level.
The fluid level must be between MIN and MAX markings.
» If the fluid level does not meet specifications:
–
Remove screw cap
1
with membrane
2
and the
shim.
– Correct the fluid level of the hydraulic clutch.
Brake fluid DOT 4 / DOT 5.1 ( p. 336)
–
Mount and tighten screw cap
1
with membrane
2
and the shim.
Info
Clean up overflowed or spilled brake fluid
immediately with water.
To Next Page
Loading...
