WHEELS, TIRES 15
255
S03931-11
–
Mount outside locking wire
4
.
–
Mount inside locking wire
5
.
The pins of the locking wires engage in the drilled holes of
the wheel axle.
Finishing work
– Remove the rear of the motorcycle from the lifting gear.
( p. 199)
– Install the main silencer. ( p. 218)
15.5 Checking the tire condition
Warning
Danger of accidents If a tire bursts while riding, the vehicle becomes uncontrollable.
– Ensure that damaged or worn tires are replaced immediately. (Your authorized KTM workshop will be
glad to help.)
To Next Page
Loading...
