TABLE OF CONTENTS
6
8 ERGONOMICS .......................................... 141
8.1 Handlebar position......................... 141
8.2 Adjusting the handlebar
position ..................................... 141
8.3 Adjusting the basic position of the
clutch lever ................................... 143
8.4 Adjusting the basic position of the
hand brake lever ............................ 144
8.5 Setting the step plate of the foot
brake lever .................................... 145
8.6 Checking the basic position of the
shift lever...................................... 146
8.7 Setting the shift lever stub.............. 147
8.8 Adjusting the footrests ................ 148
8.9 Adjusting the tilt of the
combination instrument.................. 152
9 PREPARING FOR USE............................... 155
9.1 Advice on preparing for first use ...... 155
9.2 Running in the engine .................... 157
9.3 Loading the vehicle ........................ 157
10 RIDING INSTRUCTIONS............................ 160
10.1 Checks and maintenance measures
when preparing for use ................... 160
10.2 Starting the vehicle ........................ 161
10.3 Launch Control (optional) ............... 164
10.4 Starting off.................................... 164
10.5 Starting off with launch control
(optional) ...................................... 165
10.6 Quickshifter+ (optional).................. 166
10.7 Shifting, riding .............................. 167
10.8 MSR (optional) .............................. 173
10.9 Applying the brakes........................ 174
10.10 Stopping, parking........................... 176
10.11 Transporting.................................. 178
10.12 Refueling ...................................... 180
11 SERVICE SCHEDULE ................................ 183
11.1 Additional information.................... 183
11.2 Required work ............................... 183
11.3 Recommended work ....................... 186
12 SUSPENSION SETTING............................. 188
12.1 Fork/shock absorber ....................... 188
12.2 Adjusting the spring preload of the
fork .............................................. 188
12.3 Adjusting the compression
damping of the fork........................ 189
12.4 Adjusting the rebound damping of
the fork......................................... 191
To Next Page
Loading...
