Repair manual KTM 125 / 200
Art No 3.206.005 -E
10-6C
IMPORTANT CHECKS AND MAINTENANCE TO BE CARRIED OUT BY THE RIDER
Check oil level in oil tank and bleeder hose for its kink-less arrangement ●
Check transmission oil level ●
Check brake fluid level ●
Check brake pads for wear ●
Check lighting system for proper operation ●
Check horn for proper operation ●
Lubricate and adjust actuating cables and nipples ●
Bleed fork legs in regular intervals ●
Remove and clean dust sleeves in regular intervals ●
Clean and lubricate chain, check tension and readjust it if necessary ●●
Clean air filter and filter box ●
Check tire inflation pressure and wear ●
Check coolant level ●
Check fuel lines for leaks ●
Drain and clean float chamber ●
Verify smooth operation of all controls ●
Check brake performance ●●
Treat exposed metal components (except for brake and exhaust systems) with ●
wax-based anti-corrosion agents
Treat ignition/steering lock and light switch with contact spray ●
Check all bolts, nuts, and hose clamps for their tight fit in regular intervals ●
For cross-
country use
Once a year
After every
cleaning
Before each
start
To Next Page