Repair manual KTM 125 / 200
Art No 3.206.005 -E
– Connect the radiator hoses to the engine and fill the cooling system
with a mixture of 40 % antifreeze and 60 % water. For this purpose
twist out the bleeder screws at the cylinder head and at the right
radiator. Retighten the screws as soon as the cooling liquid that
emerges is free of air bubbles.
– Mount the exhaust system.
– Mount the tank with the spoilers and the seat.
– Fix the breather tube to the frame.
– Check the electrical system for faultless operation.
– Adjust the carburetor.
–Test ride.
– After the test ride, check the engine, the cooling system and the
exhaust system for leaks.
Fixing the cables to the frame - Models with separate
lubrication
!
CAUTION
!
T
O PREVENT DISENGAGEMENT OF THE THROTTLE CABLE AND THE OIL PUMP CABLE IT
IS NECESSARY TO FIX
1 THE CABLES ABOVE THE CARBURATOR TO THE FRAME.
3-4C
1
To Next Page
Loading...
