18 SERVICE WORK ON THE ENGINE 153
101918-10
–
Remove screws
. Remove the oil filter cover
with the O-ring.
–
Pull oil filter
out of the oil filter housing.
Circlip pliers reverse (51012011000)
– Completely drain the engine oil.
– Thoroughly clean the parts and sealing area.
L02271-10
–
Insert oil filter
.
–
Lubricate the O-ring of the oil filter cover. Mount the oil filter cover
.
– Mount and tighten the screws.
Guideline
Screw, oil filter cover M5 8 Nm (5.9 lbf ft)
Info
Too little engine oil or poor-quality engine oil results in premature wear to the
engine.
To Next Page
Loading...
Need help?
General
