KTM 505 SX - Greasing the Rear Wheel Eccentric Element; Checking the Rubber Grip

MAINTENANCE WORK ON THE CHASSIS 101
10.32Greasing the rear wheel eccentric element
301798-10
– Use a grease gun to fill the rear wheel eccentric element via grease nipple 1 until
grease emerges from the left shaft seal ring A.
Long-life grease ( p. 184)
– Remove excess grease.
10.33Checking the rubber grip
401197-01
– Check the rubber grips on the handlebar for damage and wear and to ensure they are
firmly seated.
» If a rubber grip is damaged, worn, or loose:
– Change and secure the rubber grip.
Rubber grip adhesive (00062030051) ( p. 188)