KTM 505 SX - Tuning the Chassis; Compression Damping of the Shock Absorber

SERVICE SCHEDULE 46
8.2Maintenance work (as an additional order)
S20A S40A S80A J1A
Change the front brake fluid. x
•
Change the rear brake fluid. x
•
Change the sealing sleeves of the foot brake cylinder. x
•
Change the hydraulic clutch fluid. x
•
Lubricate the steering column bearing. x
•
Check/adjust the carburetor components. x
• • •
Change the oil in the front shock absorber. x
• •
Service the front shock absorber. x
•
Change the oil in the rear shock absorber. x
• • •
Service the rear shock absorber. x
• •
Change the spark plug and spark plug connector. x
• •
Change the piston. x
• •
Change the piston. (in difficult operating conditions) x
• • •
Check/measure the cylinder. x
• •
Check the cylinder head. x
• •
Change the valves, valve springs, and valve spring seats. x
• •
Check the camshaft and rocker arm. x
• •
Change the connecting rod, conrod bearing, and crank pin. x
• •
Change the crankshaft bearing. x
• •
Check the transmission and shift mechanism. x
• •