EasyManua.ls Logo

KTM 505 SX - Adding Engine Oil

KTM 505 SX
197 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE WORK ON THE ENGINE 156
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may result
in unconsciousness and/or death.
– When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
– Start the engine and check that it is oil-tight.
– Check the engine oil level. ( p. 150)
16.8Adding engine oil
Info
A lack of engine oil or poor-quality engine oil results in premature wear to the engine.
301845-10
– Check the engine for leakage.
– Remove the filler cap 1 on the clutch cover and fill up with engine oil.
Condition
External temperature: ≥ 0 °C (≥ 32 °F)
Engine oil (SAE 10W/50) ( p. 183)
Condition
External temperature: < 0 °C (< 32 °F)
Engine oil (SAE 5W/40) ( p. 183)

Table of Contents