MAINTENANCE WORK ON THE ENGINE 152
301841-10
– Place a suitable container under the engine.
– Remove oil drain plug 1 with the seal ring.
– Completely drain the engine oil.
– Thoroughly clean the oil drain plug with the magnet.
– Clean the sealing area on the engine.
– Fit oil drain plug 1 with the seal ring and tighten it.
Guideline
Oil drain plug with magnet M12x1.5 20 Nm
(14.8 lbf ft)
–
Clean the oil screen. x ( p. 153)
16.4Removing the oil filter x
Warning
Danger of scalding Engine oil and gear oil get very hot when the vehicle is driven.
– Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under lukewarm water immediately.
Warning
Environmental hazard Hazardous substances cause environmental damage.
– Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
– Place a suitable container under the engine.
To Next Page
Loading...
