KTM 505 SX - Page 172

TECHNICAL DATA - ENGINE TIGHTENING TORQUES 170
Screw, clutch spring M6 10 Nm (7.4 lbf ft) –
Screw, engine case M6 10 Nm (7.4 lbf ft) –
Screw, exhaust flange M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, ignition pulse generator cable
holder
M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, oil pump casing M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, shift drum locating M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, shift lever M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, starter motor M6 10 Nm (7.4 lbf ft) –
Screw, valve cover M6 8 Nm (5.9 lbf ft) –
Screw, water pump cover M6 10 Nm (7.4 lbf ft) –
Stud, cylinder head M6 10 Nm (7.4 lbf ft) –
Screw, camshaft bearing bridge M7x1 14 Nm (10.3 lbf ft) Lubricated with engine oil
Screw, clutch cover M7x1 14 Nm (10.3 lbf ft) –
Screw, engine case M7x1 14 Nm (10.3 lbf ft) –
Plug, crankshaft location M8 20 Nm (14.8 lbf ft) –
Screw, engine sprocket M10 60 Nm (44.3 lbf ft)
Loctite
®
2701
Spark plug M10 10… 12 Nm (7.4…
8.9 lbf ft)
–
Plug, cam lever axle M10x1 10 Nm (7.4 lbf ft) –
Plug, oil channel M10x1 10 Nm (7.4 lbf ft) –
Screw, camshaft gear M10x1 50 Nm (36.9 lbf ft) Lubricated with engine oil
Screw, rotor M10x1 80 Nm (59 lbf ft) Lubricated with engine oil
Screw, unlocking of timing chain ten-
sioner
M10x1 10 Nm (7.4 lbf ft) –