Why does the combination instrument show nothing on the display of my KTM 690 Duke USA?
If the combination instrument on your KTM Motorcycle shows nothing, it could be due to: * A blown fuse (1 or 2), so replace the fuses and set the clock.
Why is the time not correctly displayed on my KTM 690 Duke USA Motorcycle?
If the time is not displayed correctly on your KTM Motorcycle, it may be because: * Fuse 1 is blown, so replace the fuse and set the clock.
General| Bore x Stroke | 105 mm x 80 mm |
|---|---|
| Compression Ratio | 12.7:1 |
| Starter | Electric starter |
| Transmission | 6-speed |
| Fuel System | Electronic fuel injection |
| Lubrication | Forced oil lubrication with 2 oil pumps |
| Cooling | Liquid cooling |
| Clutch | APTC slipper clutch, hydraulically actuated |
| Frame | Chromium-Molybdenum steel trellis frame, powder coated |
| Suspension Travel Front | 150 mm |
| Suspension Travel Rear | 150 mm |
| Wheels Front | 3.50 x 17" |
| Wheels Rear | 5.00 x 17" |
| Tires Front | 120/70 ZR17 |
| Tires Rear | 160/60 ZR17 |
| Seat Height | 830 mm |
| Engine Type | Single-cylinder, four-stroke engine |
| Torque | 73.5 Nm |
| Handlebar | Aluminum, tapered |
| Rear Suspension | WP monoshock |
| Front Brake | Brembo four-piston radial fixed caliper, brake disc Ø 320 mm |
| Rear Brake | Brembo single-piston floating caliper, brake disc Ø 240 mm |
| Chain | 5/8 x 1/4 |
| Steering Head Angle | 65 degrees |
| Tank Capacity | 14 liters |
| Power | 54.5 kW (74 hp) @ 8, 000 rpm |
| Ignition | Electronic ignition with digital adjustment |
| Front Suspension | WP USD Ø 43 mm |
| ABS | Bosch 9MP |
Emphasizes the importance of following safety instructions for safe vehicle operation.
Explains different risk levels and associated warning symbols used in the manual.
Provides crucial safety advice regarding driving under influence and exhaust gas poisoning.
Stresses the importance of wearing appropriate protective clothing for injury prevention.
States that proper service and tuning are essential for operation and preventing wear.
Describes the function and operation of the digital combination instrument and its displays.
Offers critical advice for first-time use, including safety, protective gear, and tire break-in.
Provides guidelines and maximum engine speeds for the engine running-in phase.
Offers warnings and advice on safe loading, maximum weights, and handling characteristics.
Lists crucial pre-ride checks and maintenance steps to ensure the vehicle's roadworthiness.
Details the safe procedure for starting the motorcycle's engine, including safety warnings.
Explains how to smoothly start the motorcycle from a standstill.
Provides instructions and warnings for shifting gears and general riding practices.
Offers essential advice and warnings on how to apply the brakes effectively and safely.
Covers safe procedures for stopping and parking the motorcycle, including security and warnings.
Details the refueling process, including safety warnings and fuel specifications.
Presents a detailed table of service tasks and their recommended intervals (mileage/time).
Describes the two ranges of compression damping (high-speed and low-speed) for the shock absorber.
Provides instructions and considerations for adjusting the shock absorber's spring preload.
Details the process for adjusting the position of the rider's footrests.
Explains the ABS system, its limitations, and functional principles.
Details how to check brake discs for wear, damage, and cracks.
Explains how to check the front brake fluid level and potential issues.
Provides instructions and warnings for adding front brake fluid.
Details how to check the front brake linings for minimum thickness and wear.
Explains how to check the free travel of the foot brake lever and its importance.
Details how to adjust the foot brake lever's basic position for rider comfort.
Explains how to check the rear brake fluid level and potential issues.
Provides instructions and warnings for adding rear brake fluid.
Details how to check the rear brake linings for minimum thickness and wear.
Provides a step-by-step guide for safely removing the front wheel.
Details the correct procedure for installing the front wheel.
Explains how to safely remove the rear wheel.
Provides the correct procedure for installing the rear wheel.
Guides on inspecting tires for damage, cuts, tread depth, and age.
Explains how to check and correct tire pressure for solo and loaded riding.
Provides safety instructions and steps for removing the motorcycle battery.
Details the procedure for safely installing the motorcycle battery.
Explains how to recharge the motorcycle battery, including safety and environmental warnings.
Guides on how to change the main fuse, including its location and function.
Explains how to change the headlight bulb, including warnings about reflector damage.
Explains how to check the engine oil level at operating temperature.
Details the process for changing engine oil and filter, and cleaning oil screens.
Explains how to add engine oil to the correct level, including oil type recommendations.
To Next Page