EasyManua.ls Logo

KTM 690 LC4 - Page 72

KTM 690 LC4
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLESHOOTING »
71
TROUBLE CAUSE REMEDY
Engine overheats Defect fan or thermoswitch for fan
Air in the cooling system
Contact an authorized KTM workshop.
Bleed the cooling system (see Maintenance work)
FI lamp is blinking / lights up Error in the injection system Visit an authorized KTM workshop
Engine stalls while driving No fuel
The fuse for the ignition or fuel pump
is blown
Refuel
Replace fuse 1, 2 or 4
High oil consumption Engine oil level too high
Engine oil too thin (viscosity)
Kink in engine vent hose
Check engine oil level when the engine is warm; correct if
necessary
Use thicker engine oil; see chapter „Engine oil“
Remove the seat, move the tank back and check engine vent
hoses
Headlight and position light fail Blown fuse Replace fuse 7
Turn signal, brake light and horn
do not function
Sicherung durchgeschmolzen Replace fuse 6
Time is not displayed or not cor-
rectly displayed
Blown fuse, thus no continuous
power supply
Replace fuse 2 and set the clock.

Table of Contents

Related product manuals