7 COMBINATION INSTRUMENT
36
7.13.26 ABS
V01131-01
Condition
• The motorcycle is stationary.
Note
Voiding of the government approval for road use and the insurance
coverage If the ABS is switched off completely, the vehicle's
approval for road use is invalidated.
– Only operate the vehicle in closed-off areas remote from
public road traffic if the ABS is switched off completely.
– Press the SET button when the menu is closed.
Info
This function is not available for all country variants.
– Press the UP or DOWN button until the Motorcycle menu is
marked on the display. Press the SET button to open the menu.
– Press the UP or DOWN button until ABS is marked on the dis-
play.
–
Keep the SET button pressed for 3-5 seconds to switch off the
ABS.
Info
Do not open the throttle during deactivation.
After the ignition is switched back on, ABS is reacti-
vated.
7.13.27 ABS Mode
V01132-01
Condition
• The motorcycle is stationary.
• ABS is switched on.
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until the Motorcycle menu is
marked on the display. Press the SET button to open the menu.
– Press the UP or DOWN button until ABS Mode is marked on the
display.
– Keep the SET button pressed for 3-5 seconds to change the
ABS mode.
Info
Do not open the throttle during the selection.
If the ABS mode Road is enabled, ABS controls both
wheels.
If the ABS mode Supermoto is enabled, ABS only con-
trols the front wheel. The rear wheel is not controlled
by ABS and may lock during braking maneuvers. MSR is
deactivated.
After the ignition is switched back on, the ABS mode is
reset to Road.
To Next Page
Loading...
