SERVICE WORK ON THE ENGINE 168
700613-10
– Place a suitable container under the engine.
– Remove oil drain plug .
– Fully drain the engine oil out of the oil tank.
– Remove screws and move oil line to one side.
700615-10
– Pull oil sieve out of the oil tank.
700617-10
– Remove screw connections and move the oil line to one side.
– Remove screws. Take off oil filter cover with the O-ring.
– Pull oil filter out of the oil filter housing.
Circlip pliers reverse (51012011000)
– Completely drain the engine oil.
– Clean all oil screens and oil drain plugs with a magnet.
– Clean all sealing surfaces.
To Next Page
Loading...
Need help?
General
