KTM RC 125 Setup Instructions

2 SETUP
6
Info
Read the notes in the 12 V battery accessory pack.
– Charge the 12-V battery. ( p. 11)
– Remove the front rider's seat. ( p. 9)
– Store the tool set below the seat.
– Remove the battery cover. ( p. 10)
S01889-01
– Remove spare key and KEYCODECARD and keep in a safe place
for the handover.
– Install the 12-V battery. ( p. 13)
– Remove the remaining film, padding, the corrugated card-
board, and the other packaging material.
– Refuel. ( p. 15)
– Prepare the vehicle according to the specifications in
KTM Dealer.net for handover to the customer.

KTM RC 125 Specifications

General

Displacement	124.7 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Bore x Stroke	58 mm x 47.2 mm
Engine Type	Liquid-cooled, 1-cylinder, 4-stroke engine
Max Torque	12 Nm @ 8, 000 rpm
Front Suspension	WP upside-down fork
Rear Suspension	WP Monoshock
Front Brake	Single disc, 4-piston caliper
Rear Brake	Single disc, single-piston caliper
Frame	Steel trellis frame
Front Tire	110/70 R17
Rear Tire	150/60-17