EasyManua.ls Logo

KTM RC 390 2020 - Mounting the Front Riders Seat; Removing the Passenger Seat

KTM RC 390 2020
263 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SERVICE WORK ON THE CHASSIS 13
115
V00692-10
Main work
Push dust boots
1
of both fork legs downward.
Info
The dust boots remove dust and coarse dirt particles
from the inside fork tubes. Over time, dirt can accumu-
late behind the dust boots. If this dirt is not removed,
the oil seals behind can start to leak.
Warning
Danger of accidentsOil or grease on the brake discs
reduces the braking effect.
Always keep the brake discs free of oil and grease.
Clean the brake discs with brake cleaner when nec-
essary.
Clean and oil the dust boots and inner fork tubes of both fork
legs.
Universal oil spray ( p. 250)
Press the dust boots back into the installation position.
Remove the excess oil.
Finishing work
Take the motorcycle off the front lifting gear. ( p. 113)

Table of Contents

Related product manuals