Kubota V3300-E2B - Page 73

S-10
V3300-E2B, V3300-T-E2B, WSM
DIESEL ENGINE
LUBRICATING SYSTEM
W10139730
COOLING SYSTEM
W10135990
Item Factory Specification Allowable Limit
Engine Oil Pressure At Idle Speed
At Rated Speed
–
196 to 392 kPa
2.0 to 4.0 kgf/cm
2
28 to 57 psi
49 kPa
0.5 kgf/cm
2
7 psi
147.1 kPa
1.5 kgf/cm
2
21.3 psi
Engine Oil Pressure Switch Working Pressure 39.2 to 58.8 kPa
0.4 to 0.6 kgf/cm
2
5.6 to 8.4 psi
–
Inner Rotor to Outer Rotor Clearance 0.04 to 0.16 mm
0.0016 to 0.0063 in.
0.3 mm
0.0118 in.
Outer Rotor to Pump Body Clearance 0.100 to 0.184 mm
0.0039 to 0.0072 in.
0.3 mm
0.0118 in.
Inner Rotor to Cover Clearance 0.025 to 0.075 mm
0.0010 to 0.0030 in.
0.225 mm
0.0089 in.
Relief Valve Working Pressure 885 kPa
9.04 kgf/cm
2
129 psi
–
Thermostat Valve Opening
Temperature
Valve Opening
Temperature
(Opened
Completely)
74.5 to 78.5 °C
166.1 to 173.3 °F
90 °C
194 °F
–
–
Radiator Water Tightness Water tightness at
specified pressure
137 kPa
1.4 kgf/cm
2
20 psi
–
Radiator Cap Air Leakage 10 seconds or more
88 → 59 kPa
0.9 → 0.6 kgf/cm
2
13 → 9 psi
–
Fan Belt Tension 10.0 to 12.0 mm / 98 N
0.394 to 0.472 in. / 98 N
(10 kgf, 22 lbs)
–
KiSC issued 06, 2006 A