To Next PageTo Next PageWhat does error E2 E mean on my Kuppersberg ICS 607 Hob and what should I do?
Error E2 E indicates that the temperature sensor of the IGBT is high. Please restart the Kuppersberg induction hob after it cools down.
What does error E1E mean on my Kuppersberg ICS 607 Hob and how can I fix it?
Error E1E means the temperature sensor of the ceramic glass plate is high. Please restart the Kuppersberg induction hob after it cools down.
What does error E4 E mean on my Kuppersberg ICS 607 Hob and how to fix it?
Error E4 E indicates an abnormal supply voltage that is too low. Inspect whether the power supply is normal.
What to do if my Kuppersberg ICS 607 shows error E3 E?
Error E3 E indicates an abnormal supply voltage that is too high. Inspect whether the power supply is normal, and power on after the power supply is normal.
What to do if Kuppersberg ICS 607 Hob displays 'H'?
The 'H' notice indicates a normal high temperature. It will disappear automatically once the temperature decreases.
What to do if my Kuppersberg Hob displays error code ER03?
If your Kuppersberg Hob displays 'ER03', it means that water or a pot is covering the user interface. To resolve this, clean the user interface.
Appliance not for use by persons with reduced capabilities unless supervised.
Appliance and accessible parts become hot during use.
Children under 8 must be kept away unless continuously supervised.
If surface is cracked, switch off to avoid electric shock.
Do not store items on cooking surfaces to prevent fire danger.
Cooking process must be supervised, even for short durations.
Unattended cooking with fat or oil can be dangerous and may result in fire.
If supply cord is damaged, it must be replaced by manufacturer or agent.
Do not use water; switch off and cover flame with lid or blanket.
Use only manufacturer-designed or indicated hob guards.
Overview of models ICS 644, ICS 645 F, ICD 601, ICS 804, ICS 905, ICD 901, ICI 622 W.
Always switch off electricity supply before performing maintenance.
If surface is cracked, disconnect power to avoid electric shock.
Avoid abrasive materials or pan bases that wear markings.
Check correct connection before calling customer service.
Error codes (ER03, H, E, E7) for ceramic hobs and their causes/solutions.
Error codes (U, ER03, F1E) for induction hobs and their causes/solutions.
Error codes (F3E, F4E, E1E, E2E, E3E, E4E, E5E) and their causes/solutions.
Cut work surface to size, ensure 5cm space, 30mm worktop thickness, use heat-resistant material.
Table of installation dimensions (L, W, H, D, A, B, X) for various models.
Check work surface, heat resistance, oven fan, compliance with regulations.
Isolating switch type, accessibility, consult local authorities.
Ensure cable is not pinched, adequate fresh air flow, thermal barrier if above drawer.
Hob must be connected by a qualified person only.
Check wiring system suitability, voltage, and cable capacity.
Check if wiring system is suitable; alterations by electrician only.
Requires a 32 Amp miniature circuit breaker; specific installation rules.
Specs for ECO 411/ECS 403, ECS 627, ICS 607/etc. (Cooking zones, voltage, power, dimensions).
Specs for ECS 630, ICS 804, ICS 905/ICD 901 (Cooking zones, voltage, power, dimensions).
General| Type | Induction |
|---|---|
| Number of Cooking Zones | 4 |
| Total Power | 7400 W |
| Control Type | Touch |
| Hob Material | Glass Ceramic |
| Weight | 10 kg |
| Voltage | 220-240 V |
| Frequency | 50-60 Hz |
| Height | 55 mm |
| Safety Features | Child Lock, Overheat Protection |
