Kurzweil PC3 - Page 33

Setup Mode
Riffs
3-19
Riff
SettingtheRiffparametertoOnwillenablethe rifffeatureforthecurrentzoneinsetupmode.
SettingthisparametertoOffwilldisabletheriffforthiszone.
Song
SelectthesongyouwishtouseintheSongparameterbyusingtheAlphaWheel,‐/+buttons,or
the
alphanumericpad.
Start
UsetheStartparametertospecifytheriffstartpoint.ThetimeformatisBar:Beat:Tick.Barcan
besettoanybarinthesequence,andBeatcanbesettoanybeatinthatbar(beatrangeis
dependentontimesigna ture. )Tick
canbesetfrom0to959.Sincethereare960possiblestart
pointswithinabeat,youcanspecifyyourrifftostartonanycommonbeatsubdivisionmoments
(andafewuncommonones).ThefollowingTickvaluescorrespondtothefollow ingbeat
subdivisionmoments:
Beat Subdivision
Beat Subdivision
Moment
Tick Value
Quarter note 1st 0
8th note
1st 0
2nd 480
8th note triplet
1st 0
2nd 320
3rd 640
16th note
1st 0
2nd 240
3rd 480
4th 720
16th note quintuplet
1st 0
2nd 192
3rd 384
4th 576
5th 768
16th note triplet (sextuplets)
1st 0
2nd 160
3rd 320
4th 480
5th 640
6th 800
Table 0-1 Subdivision Values