Kurzweil PC3 - Editing Algorithm Wiring

Master Mode
MAIN
7-1
Chapter 7
Master Mode
PresstheMastermodebuttontoenterMastermode,whichcontainsparametersaffectingthe
PC3’soverallperformanceandsystemsetup.YoucansetthesystemClocksothatthePC3will
time‐stampyourfilescorrectly.YoucanusetheObjecttooltorenameordeleteselectionsof
objects.Youcan
alsoentertheBootLoadertoaccessanumberofsystemandfileutilities,oruse
ResettodeletealluserobjectsandrestorethePC3’smemorytoitsoriginalfactorysettings.
WhenyouexitMasterMode(orMIDIMode)thePC3savesaMasterTable(unless
MasterTableLockisOn
—moreonthisbelow.)TheMasterTableremembersthesettingsofthe
Masterpages, aswellasthestateofthePC3,suchaswhichprogramsareassignedtoeach
channel,settingsforMIDI ModeTransmitandReceivepages,andMasterFXsettings.Explicit
savingoftheMasterTableis
alsopossible.
MAIN
OntheMasterModeMAIN page you’llfindparametersforsettingtheoveralltuningand
transpositionofthePC3,overallFXsettings,drumprogramremapping,clocksourceoptions,
IDentryoptions,demosongoptions,aswellasoptionsforsavingmastermodesettingsand
remotetriggeringofPC3functions.
Parameter Range of Values Default
Tune ± 100 cents 0
Transpose -128 to 127 semitones 0
FX Mode Performance, Multitrack Performance
Drum Remap None, GM None
ID Entry Global, Bank Global
Setup Controllers (SetupCtls) Instant, Pass Entry Instant
Master Lock On, Off Off
Demo Button On, Off On
Buttons Mode Off, On Off
Display Lyr/Zone, Ctls Off