Kurzweil PC3 - KB3 Mode Editing

7-10
Master Mode
OUTPUT
Default Sequence
TheDefaultSequenceparameterspecifiesthesongthatisusedasatemplatefornewandclear
songsinSongmode.
OUTPUT
TheOUTPUTpagehasoptionsfordigitalaudiooutputvolumeandsamplerate.Youcanalso
settheanalogAuxoutputstomirrortheprimaryanalogoutputs.YoucanalsocontroltheMIDI
clocksourceandMIDIclockoutput.
Output Clock
TosendaMIDIclockpulsetotheMIDIOutport,setthisparametertoOn.Otherwise,setitto
Off.
Digital Output Volume (Dig. out volume)
TheDigitalOutputVolumeparameterspecifiesthebehaviorof thePC3’sDigitalOutput.Setting
thisparametertoVari abl emakestheDigitalOutputrespondtochangesmadeonthevolume
slider.SettingthisparametertoFixe dmakes theDigitalOutputoutputasignalwithafixed
volume.
Digital Output (Dig. Out)
ThisDigitalOutputparameterspecifiesthePC3ʹsdigitaloutputsamplerate.Internallyclocked
sampleratesgofrom44.1Kupto192K.
Externallysyncedsampleratescover20‐220KHzin3ranges.Besuretheexternalclock
frequencyiswithintherangeyouselect.
Aux Out Pair Mode
TheAuxOutPairModeparameterspecifiesthebehavioroftheSecondaryAudioOutputs
(locatedonthebackpanelunderneaththe“BalancedAnalogOutputs‐AUX”label.Settingthis
parametertoNormalmakestheAuxOutputsbehaveassuch.SettingthisparametertoMirror
PrimaryOutputsmakestheAuxOutputsoutputthe
sameaudiosignalasthePrimaryoutput.
Parameter Range of Values Default
Output Clock Off, On Off
Digital Output Volume (Dig. out volume) Variable, Fixed Variable
Digital Output (Dig.Out) Digital Output List 48 KHz
Aux Out Pair Mode Normal, Mirror Primary Outputs Normal
Clock Source Internal, External Internal