Kverneland BE - Default Chapter; Table of Contents

Table of contents
3
Table o f co ntents
Preface ....................................................... 4
Target group for this operating manual 4
Symbols used 4
Safety ......................................................... 5
Safety decals 5
General safety information 7
Getting to know the plough ..................... 10
Proper use 10
Features 10
Components 11
Technical specifications 12
Information plate 13
Optional equipment .................................. 14
Preparing for operation ............................ 18
Tractor 18
Remove paint 19
Control system 19
Coupling .................................................... 20
Safety 20
Coupling 20
Connection geometry 21
Transport ................................................... 22
Safety 22
Prior to transport 23
Parking stand 23
Adjusting the plough ................................ 24
Safety 24
Working width 24
First furrow width 25
Working depth 26
Set-up 27
Finishing 28
Disc coulter [+] 29
Skimmer [+] 31
Skimming board [+] 32
Ploughing .................................................. 33
Prior to ploughing 33
Checks during ploughing 33
Maintenance and care .............................. 34
Safety 34
Prior to maintenance 34
Maintenance chart 35
Cleaning 35
Lubrication 36
Replace hoses 39
Replace wearing parts 39
Tighten bolts and nuts 40
Check springs for correct length 41
Tyre pressure 41
Align bodies 41
Possible modifications ............................. 42
Spring release system 42
Lifting up the plough body 45
Parking and storage .................................. 46
Safety 46
Parking and storage 46
Ploughs with Eco-shares [+] 46
Checklist .................................................... 47
Disposal of the plough .............................. 49
EC Declaration of conformity ................... 50