Maintenance and care
39
Replace hoses
Check the length of the hose
Check the length of the hose on the plough for sufficient slack. Overly
taut or stretched hoses can become damaged or broken.
Replace the hydraulic hoses
•
Immediately when they have become worn or defective.
•
Every 6 years
Relieve the pressure in the hydraulic system
Disconnect the hoses from the tractor
Remove the old hose.
Fit the new hose
Tighten all couplings fully
Replace wearing
parts
•
Replace parts in contact with the soil and other parts when they are
worn or damaged.
•
Use only genuine Kverneland spare parts.
Remove the old part.
Fit the new part
Remove paint from any surfaces in contact with the soil
T
IP
!
Reversible point
When reversible points are worn at the end, they can be reversed.
They must be reversed when they are worn to such an extent that they
wear the share or if the plough has trouble maintaining the ploughing
depth.
To Next Page