Maintenance and care
35
Maintenance chart
The following maintenance chart displays the interval of the different
maintenance operations.
Cleaning
Thorough cleaning will give the plough a longer service life.
•
The plough can be cleaned using pressure equipment, but atten-
tion must be paid when spraying bearings and hydraulic compo-
nents.
•
Lubricate all nipples after power cleaning.
after the first few hours of use
daily
before the ploughing season
after the ploughing season
after power cleaning
yearly/after 200 ha
when worn / damaged
After 1000 km of transport
every 6 years
Check the condition of the plough X X
Lubrication X X X X
Replace the hydraulic hoses X X
Replace wearing parts X
Retighten bolts and nuts X X
Check the release-system springs X
Check the tyre pressure X X
Corrosion protection of parts in direct contact with the
soil
X
True the bodies X
Replace the drag axle X
To Next Page