Control Functions of Mechanism
37
When replacing the battery, avoid inappropriate
operations which may damage the functionality of the
car key. Please visit the professional service station
for inspection.
The sensing distance is for reference only, and the
KEYLESS button is still required to start the power.
The keyless car key uses radio wave technologies, the
range of operation will be affected by surrounding
environmental factors. If the keyless car key is placed
in the storage box or front storage box, it may affect
the communication between the keyless car key and
the vehicle, leading to poor sensing.
If the keyless car key is out of power, it may affect the
sensing range or even lose its remote detection
function. When this happens, the short-range sensing
function can be used instead. Place the keyless car
key within the short-range antenna detection range
near the right side of the switch set, press the main
switch button for a short beep sound to unlock and
turn on power.
Under power-on state, when the keyless car key
leaves the short-range sensor location, if the vehicle is
to be powered-off, it will make 10 warning beeps as
reminder. Press the main switch button again to turn
off.
The keyless key car should be carried with you at all
times. Do not place it in the storage box or on the
vehicle.
Take caution when the keyless car key enters
operable range, as any person without the keyless car
key but within sensing range may start the engine and
ride the vehicle away.
When the keyless car key is not within sensing
distance, the vehicle may not be started.
When the keyless car key leaves the sensing distance,
there can still be instances of power consumption.
When the user is unable to operate the KEYLESS
main switch, the battery in the keyless car key should
be replaced as soon as possible.
To Next Page
Loading...
Need help?
General
