Checks before Riding
89
Checks before Riding
Keep a good habit to perform checks before riding
For keeping your vehicle in a safe and effective operating
condition, perform regular checks, adjustments and
lubricating maintenance according to the Maintenance
Program.
Exhaust Control System can reduce generation of
pollutants in the exhaust gas of your scooter. Please
perform maintenance according to specified mileage or
schedule, for ensuring compliance with exhaust emission
standards.
If you are not familiar with the motorcycle inspection
and maintenance, please contact KWANG YANG
dealer for services.
Injury or electrocution may occur if any body part or
clothing touches a running engine. Please stop the
engine while performing vehicle maintenance.
For preventing burning hazard after riding a vehicle,
touch its engine, muffler, brake disc, brake caliber or
brake pad only after it has cooled down.
When performing maintenance, never run the engine
in an enclosed space; there is a risk of carbon
monoxide intoxication due to exhaust emission.
To avoid damaging the vehicle, never carry out any
maintenance without receiving a professional training
or lacking of a special tool.
Engine Oil and Oil Filter
Before riding the vehicle, check engine oil for
compliance with level requirement or any leakage.
Engine Oil and Oil Filter shall be replaced regularly
according to maintenance and lubrication schedule.
To Next Page
Loading...
Need help?
General
